Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Determination of ambroxol in an automated multi-pumping pulsed flow system.

A new flow methodology exploiting the multi-pumping approach was developed for the spectrophotometric determination of ambroxol hydrochloride in pharmaceutical preparations. The flow manifold was implemented by using, exclusively, multiple solenoid-actuated micro-pumps, which acted simultaneously as sample insertion, solutions propelling and reagents commutation units. Linear calibration plots were obtained over an ambroxol concentration ranging from 10 to 200 mg l(-1) (r.s.d. < 0.5%, n = 15) and a sampling rate of about 60 samples per hour (flow rate = 1.92 ml min(-1), sample volume = 80 microl).     

Adsorption of anionic dyes on chitosan beads. 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics

In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed.     

IAEA analytical quality assurance programmes to meet the present and future needs of developing countries

For many years the International Atomic Energy Agency (IAEA) has been promoting analytical quality assurance and quality control in its Member States with emphasis on measurands that are amenable to analysis by nuclear and related techniques, i.e. radionuclides, trace elements, and stable isotopes. This paper reviews briefly the rationale for some of these activities, particularly in relation to the needs of participants in developing countries arising out of co-ordinated research programmes, technical co-operation projects and global and regional networks. Emphasis is given to biological and environmental reference materials with a matrix of natural origin. Also described are some activities arising out of the requirements of ISO-25 and other relevant international quality standards.     

Sulphate preconcentration by anion exchange resin in flow injection and its turbidimetric determination in water

A preconcentration procedure was established for sulphate determination in rain waters at the mg/l level, employing a small column packed with the AG1-X8 (200-400 mesh) anionic resin inserted into a flow injection system. Sulphate determination was performed by using the turbidimetric method based on reaction with barium. For concentrations within 0.10 and 2.0 MgSO(2-)(4)/l, a throughput of 50 determinations/hr was achieved, and the relative standard deviation of results was better than 2%.     

Immobilization of protein on ferromagnetic Dacron

Ferromagnetic Dacron (polyethyleneterephthalate) is proposed as a matrix to immobilize proteins covalently. Dacron in powder was magnetized by reacting ferrous (Fe+2) and ferric (Fe+3) ions with its hydrazide form at pH 8.3. Ferromagnetic hydrazide Dacron was converted to ferromagnetic azide Dacron and amyloglucosidase (E.C. 3.2.1.3) was covalently bound through the latter group. The catalytic property of the enzyme was preserved (8% of the specific activity estimated for the soluble enzyme) and all the magnetic amyloglucosidase Dacron derivative was recovered by using a magnetic field. No activity was detected in the supernatant.     

Alpha emitters from uranium mining in the environment

Uranium mining and milling activities usually generate an enhancement of radionuclide concentrations in the environment that may cause increased radiological exposure to mankind. For risk assessment and radiological protection of man and environment in these areas, usually, it is needed to implement radiological surveillance of water, soils, agricultural products, aerosols, and mining waste discharges as well. Radionuclides to be monitored in priority are alpha-emitting nuclides of the uranium natural series. Radioactivity analysis of materials from uranium mining areas of Portugal shows departure from secular radioactive equilibrium amongst uranium series radionuclides, thus rendering invalid the assumption of equilibrium and requiring the actual determination of each radionuclide. Radionuclide measurements performed with high resolution alphaspectrometry, as reported herein, produce accurate results on specific radionuclides that are essential in computing radiation doses to critical groups of the population.     

UV-LYSOGENIC INDUCTION OF Λ PHAGE IN lexA1 MUTANTS OF Escherichia coli: KINETICS OF THE PROCESS

Abstract— Although the lex gene has been described until recently as being required for lysogenic induction, both our work and the work of others have reported Λ prophage induction in some lexA mutants. However, the characteristics of the process were not defined. We describe UV induction of prophage in a lexA1 mutant at a slightly lower level and requiring 2 times longer than the wild type. As demonstrated in some work, in cells treated with low levels of rifampicin (RIF) no new synthesis of RecA protein is needed for the prophage induction although the onset of lysis is delayed. We suggest that the lysogenic induction in lexA cells is due to the same mechanism that induces prophage in the wild type cells treated with RIF. That is, the induction is due to the cleavage of Λ represser by the basal RecA protease in the DNA-single-strand gap, since RecA protease and monomer represser both have high affinity for this type of DNA. So, LexA protein need not be cleaved for the prophage induction.
No Weigle-reactivation (WR) was detected in the lex mutant even after a long post-irradiation incubation, suggesting that unlike prophage induction, WR requires LexA protein cleavage.     

A theoretical investigation of the interaction between H,Li, Na,K, and fullerenes

We studied the interaction between H, Li, Na, and K with one and two C₆₀ molecules using unrestricted Hartree–Fock (UHF) methods. We investigated the effects of distances between the doping atoms and the C₆₀ clusters, total charges, interaction energies, stabilities, HOMO‐LUMO energy differences, charge distribution, and potential energy surfaces. The effect of each doping atom was analyzed and potential technological applications discussed. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Comparison of the Structural Information on Sol-Gel Systems Provided by Pyrene Labeled Fluorescent Probes

The influence of the acid catalyst concentration on the structural evolution of a sol-gel system was studied by doping TEOS based starting solutions with two fluorescent probes: a polystyrene chain (M _n =1700) and a much shorter alkane chain (M=172), both of them labeled at both ends with 1-pyrenyl. For this purpose, each probe was incorporated in two TEOS∶H₂O∶C₂H₅OH mixtures (molar ratios 1∶4∶1), one at pH 1.2 and the other at pH 2.5 (respectively below and above the isoelectric point of silica). Very low concentrations of the probes were used (≤10⁻⁶ M), so the pyrene dimmers and excimers were formed only intramolecularly. The ratios of excimer to monomer fluorescence intensities at excitation wavelength of 360 nm (where mainly the ground state pyrene dimmers are excited) were studied as a function of time. Different evolutions of these ratios were observed, which allowed us to predict that the silica structure developsvia the formation of primary particles, even at pH values below the isoelectric point of silica, where it is not possible to directly detect their formation.